BJYLP - IBM,SERIES III MOD 10/20 TONER
- MSDS: BJYLP
- Manufacturer: IBM CORP
- Product Name: IBM,SERIES III MOD 10/20 TONER
- National Stock Number: 6850-01-070-0619
Product Identification
Product ID:IBM,SERIES III MOD 10/20 TONER
MSDS Date:01/25/1991
FSC:6850
NIIN:01-070-0619
MSDS Number: BJYLP
Responsible Party
ARMONK, NY 10504-1709
US
Emergency Phone: I-800-IBM-4333
Info Phone: 1-800-IBM-4333
Cage: 30874
Contractor
Telephone: 800-426-4333/FAX 214-280-3903
Cage: 30874
Ingredients
ACRYLIC COPOLYMER
CAS: 25608-33-7
STYRENE COPOLYMER
CAS: 25119-62-4
POLYMERIZED FATTY ACID AMIDE
CAS: 68650-54-4
MALEATED ROSIN
CAS: 8050-28-0
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3; 9192
SILICA GEL
CAS: 112945-52-5
RTECS: VV7310000
Hazards
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:LOW HEALTH HAZARDS;MAY CAUSE
MECHANICAL IRRITATION OF EYES,SKIN AND RESPIRATORY TRACT;REDNESS OR
BURNS OF EYES ARE POSSIBLE.
Explanation of Carcinogenicity:DATA PER MGF MSDS.
Effects of Overexposure:SEE HEALTH HAZARDS DATA.
Medical Cond Aggravated by Exposure:PRE-EXISTING CONDITIONS MAY BE
WORSEN.
First Aid
First Aid:EYES AND SKIN:FLUSH WITH LARGE AMOUNT OF WATER FOR ABOUT
15-20 MINUTES;SEEK MEDICAL ATTENTION IMMEDIATELY.INHALATION:REMOVE
TO FRESH AIR;CALL A PHYSICIAN.INGESTION:SEEK MEDICAL ATTENTION
IMMEDIATELY.
Fire Fighting
Flash Point:NONE
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. EVACUATE AREA. COOL
FIRE EXPOSED CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:MAY FORM AN EXPLOSIVE MIXTURE DUE TO
EXTREME HEAT; COMBUSTION OR HEAT OF FIRE MAY PRODUCE HAZARDOUS
DECOMPOSITION PRODUCTS AND VAPORS.
Accidental Release
Spill Release Procedures:USE PROPER PERSONAL PROTECTION;SWEEP UP OR
VACUUM AND COLLECT FOR PROPER DISPOSAL IN AN APPROVED CONTAINER.
Handling
Handling and Storage Precautions:STORE IN COOL,DRY AND WELL VENTILATED
AREA.KEEP CONTAINER CLOSED WHEN NOT IN USE.
Other Precautions:WASH THOROUGHLY AFTER EACH USE.
Exposure Controls
Respiratory Protection:NONE NEEDED WITH AN ADEQUATE VENTILATION. USE
NIOSH/MSHA APPROVED RESPIRATOR FOR DUST/MIST IF ABOVE PEL/TLV.
Ventilation:LOCAL/GENERAL TO MAINTAIN PEL/TLV.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHINGS.EYE-WASH
FACILITIES,SAFETY SHOWER.
Work Hygienic Practices:AVOID CONTACT WITH EYES AND SKIN;DO NOT BREATHE
VAPORS/MIST/DUST.WASH THOROUGHLY AFTER EACH USE;DO NOT
EAT,DRINK,SMOKE.
Supplemental Safety and Health
Chemical Properties
HCC:N1
Spec Gravity:0.9
Solubility in Water:NIL
Appearance and Odor:BLACK POWDERY POLYMERIC MATERIAL;SLIGHT ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HIGH HEAT
Hazardous Decomposition Products:OXIDES OF CARBON AND NITROGEN
Disposal
Waste Disposal Methods:CONSULT LOCAL AUTHORITIES;DISPOSAL MUST BE IN
ACCORDANCE WITH LOCAL,STATE AND FEDERAL REGULATIONS
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.